#Inkscape gcode save error mac os
#Inkscape gcode save error software

The default values that are embedded in Inkscape extension, are reasonable, but you can try lowering the speed of the travel and of the pen up/down movement, to get better result. Speed of X/Y travel and of Z-axis (pen up/down), matters a lot with this plotter. There are a few tricks that I learned by using this plotter, in order to get best plots out of it. Please take a look at it here if youвЂ™re interested. I also made a shared Google Drive where I uploaded my GCode and original SVG files. You can see the first plots recordings here:Д®ven though the plotter did a great job, the pen didnвЂ™t spread the ink evenly In order to do a simple initial test, I used Uni-ball vision pen (available on Amazon at ). I also got one of the files from my Rad Polygons SVG Pack: So I went over there and grabbed a few, for example this file of a Stanford bunny. One of the websites I run, В has hundreds of vector files (SVG) ready for plotting. Z-axis height after printing in mm вЂ“ how high to pick up the pen after the print is done.Z-axis print height in mm вЂ“ the total height of the pen up/down travel.Z-axis feedrate вЂ“ how fast to pick up the pen or to lower it.Values of ~500-1000 would slow down the plotter, values of 2000-3000 would make it go as fast as it can. XY axes feedrate in mm/min вЂ“ speed of moving the pen in x/y directions.Pen Down Height вЂ“ how low to put the pen down above the paper (in millimeters).Pen Up Height вЂ“ how high to pick up the pen above the paper (in millimeters).Here are the settings that I used to do some sample plots:ДЄs I understand, the values are as follows: With the extension installed, I opened Inkscape, created a simple shape and used вЂњSave AsвЂќ menu option to save as вЂњSovol SO-2 GCodeвЂќ. Here are the files I had to move into extensions folder: I took the extension and placed it into Inkscape extensions folder. This extension is included on the micro SD card that came with the plotter and should work on any platform, using Inkscape version 1 and above. Sovol provided Inkscape extension that lets you easily save a vector file (SVG file) to GCode that the plotter will understand. This GCode is then sent by using Universal GCode Sender application to the plotter. In order to send the files to the plotter, the vector output from Inkscape has to be converted to GCode that the plotter understands.

#Inkscape gcode save error mac os

If you are using Mac OS or Windows, just download and install those programs as you would install any other software, For installing Inkscape, I used Snap installer:, and for installing UGS (Universal GCode sender), I downloaded it from here. I will be using a Raspberry Pi mini computer to work with the plotter, so I installed those two programs on it.

#Inkscape gcode save error software

In order to operate the plotter, I had to install the following software on the computer that I will be using with the plotter: In order to test the plotting function, I had to connect the plotter to a computer and explore the software to send commands / files to it. Next, I decided to first test the plotter function so I attached the pen holding mechanism. When the wires are connected and all bolts are tightened, the main assembly is done. One of my children helped me screw these parts together:ДЄfter tightening these two bolts on the side, I took off the nuts that were on top of the four bolts in the picture below, put the two axes on top of each other, and put the nuts back, tightening them by hand all the way:ДЇinally, to complete the assembly, the wires all need to be connected to the motors and to one of the limit switches on the X axis.

To assemble the machine after itвЂ™s taken out of the box, the two axes (X-axis and Y-axis) need to be joined together using four nuts, and a metal piece need to be joined to one of the sides with two bolts.

USB cable to connect the plotter to computer.

MicroSD card with sample files, Inkscape software.

Disassembled plotter that consists of 2 parts.Inside the box, you will find the following: The plotter comes neatly packaged and well-protected. The plotter uses GCode to operate, and uses a small stepper motor to lift the pen carriage / laser carriage up and down. Sovol SO2 is a multi-functional plotter/laser engraver with bed size of 280x210mm. I will focus on the plotting function in this blog post and will review the laser function in the next post. In this blog post, I will review Sovol SO2 Plotter provided to me by the manufacturer. Time to time, I get to try another plotter and evaluate it. I run, and have been very active in the plotter community in the recent years.